Fire Hydrants

Data can be obtained through Burlington County's GIS Distribution Policy and Fee Schedule which are provided below. This is intended for informational purposes only. Anyone interested in acquiring data should refer to the information provided under Distribution Information. BURLINGTON COUNTY GIS DATA DISTRIBUTION POLICY General This policy defines procedures for service requests related to digital information that is contained within the County's GIS database (a contents list can be provided) and printed output thereof. Digital and/or hard copy maps of the information in the GIS database will be made available to any member of the general public upon completion of a signed request form, signed data sharing agreement/addendum if applicable, and/or payment of the appropriate fee. The general public includes the public and private sector, consultants, utility companies, nonprofit organizations, etc. (For exceptions to fees, see Exemptions below). The digital information will be provided in .E00 export, ESRI shapefile, ArcInfo coverage, or personal geodatabase. DXF format will be provided for small orders only with an additional charge for conversion. All digital data will be in the NAD83 Stateplane coordinate system with the units of measure being feet. Excluded Information includes the Burlington County Engineering topographic database (and all associated Information of that database). The applicant shall be responsible to locate the general area for which they want to purchase information. If the request is made at any geographic level other than township or USGS quarterquad, the geographic extent must be provided by block, lot number, or coordinates specified in NAD83 stateplane feet. Fees Fees are established by NJ statute and/or resolution of the Board of Chosen Freeholders. Payment shall be made at the time the applicant files the request form. An application will not be considered complete unless payment in the correct amount and in an approved form is received. The approved forms of payment are; personal check, certified check, cashier's check, money order, and bank check. No third party checks will be accepted. All checks shall be made payable to the Burlington County Treasurer. Time Maps will be supplied as soon as possible upon request and submission of correct fee. A minimum of three (3) working days is required to complete any request, however, all requests will be completed within 7 days unless requestor is notified that additional time is needed. Mail-in requests will be accepted with completed application and fee. Results of the request will be sent out by standard mail. The results can be picked up in person by requestor or express mailed if requestor makes payment arrangements with the express mail service. No telephone requests will be accepted. Processing of any request will not occur until payment has been received in full. Exemptions The only exemptions from paying fees will be for municipalities or their consultant working on municipal projects, consultants working for the county, school districts, federal/state agencies, and emergency service organizations. In the case of such exemptions, the signing of a data sharing agreement will be the only requirement. However, only a limited quantity of hardcopies will be available. County Projects Where a consultant (architect, engineer, surveyor, attorney, etc.) is doing a project for the county and use of the data will save money on the project cost, data will be made available as needed. A Data Sharing Agreement and/or addendum as applicable will have to be signed. Only a limited number of hardcopies will be produced. Data are generally granted for the life of the project. The information will be available in digital E00, ArcInfo coverage, ESRI shapefile, or personal geodatabase. DXF format may be provided at the conversion fee mentioned above. Public Viewing of Maps Any member of the public may view any of the GIS database during normal business hours at the GIS Division Office provided that it does not interfere with the conducting of county business. Nothing can be copied or traced from information viewed. Nonprofits The County may grant an exemption for non-profit organizations engaged in projects that further a public purpose or the public interest. Typically these are projects including but not limited to traffic studies, farmland and open space studies and projects, wetlands and watershed studies, and other environmental initiatives that complement the County's interests. Township Wide Planning Project (TWPP) 1. The Municipal Governing Body must make a formal written request either through the manager or mayor for any GIS information available at the county. The request should state the specific need and explain how the information will be used by the Municipality. Each request must be reviewed and approved by the Board of Chosen Freeholders. 2. The data will only be supplied on appropriate media. It may be emailed if the data requested is less than 10 MB. No format conversion will be made by the County unless proper fee is paid. 3. Large mapping areas may require up to 2 weeks to provide the data requested by the Municipality unless notified that additional time is needed 4. All new digital information developed in the course of the project for which the county data was requested shall be provided to the county for inclusion within its GIS database. 5. The municipality must assume responsibility for any maps produced as a result of their project. The maps must credit Burlington County as the source of base data with the disclaimer: "This map (report or publication) was developed, in part, using Burlington County GIS data in conjunction with the Township's work, but this secondary product has not been verified by Burlington County". 6. The municipality must provide a report annually on the status of the project. Specifications All digital information that is provided will follow the specifications outlined in the Data Sharing Agreement, if applicable. This includes the media used for the transfer and the cost of the media. County of Burlington Department of Information Technology REQUEST FOR GIS DATABASE DIGITAL/HARDCOPY INFORMATION This form provides for the duplication of digital and hardcopy GIS information. Copies of data files or projects will be provided without alteration in format. Burlington County, (hereinafter, "County") has made every effort to verify the information made available through this form; however, you are advised that the County does not warrant or guarantee the accuracy of said information or its fitness for any particular purpose. You are hereby advised all information provided through this form must be individually verified with the appropriate sources to insure accuracy. Updates to any information will not be automatically provided and must be applied dor under a separate request. Complete this form providing a detailed description of the area concerned. Any questions may be directed to (609) 702-7067. Make checks payable to Treasurer, Burlington County. Forward this form along with proper fee to the following mailing address: County of Burlington, Department of Information Technology , GIS Section 49 Rancocas Rd., Rm. 111 P. O. Box 6000 Mt. Holly, NJ 08060 Requestor's contact information: Organization Name: Contact Name: Address: City, State, ZIP: Phone #: Email Address: FEES: A. DIGITAL FORMAT (Vector, or line, data or images only. No text.) Description of project or file desired. (The attachment of a map, description of area by block & lot, coordinate, or other identifying factor would help locate an area) 1. TAX PARCELS OWNERSHIP INFORMATION After the number of entire municipalites has been identified, the Department of Information Technology will determine how many CD's are needed to provide the digital information (# of Cd's______ X $2.50) 2. GPS ROADS This data layer fits on a single CD. Total cost is $2.50 3. ORTHOPHOTOS - 1995 (only available in whole USGS quarter quads = ) a. Description by USGS quarter quad or other identifying factor b. Format & Fees: There are a total of 78 USGS quarter quads in ".jpg" format # of CD's__________ X $2.50 per CD = $ 4. ORTHOPHOTOS - 2000 (governed by license agreement with DVRPC) (only available in whole tiles) Format & Fees: a. There are a total of 606 tiles in ".tif" format # of CD's__________ X $2.50 per CD = $ b. There are a total of 606 tiles in "MrSid" format # of CD's__________ X $2.50 per CD = $ c. Total for Orthophotos - 2000 4.a. + 4.b $ 5. All other data (list of available layers provided upon request) DATA LAYERS Fee per layer, database and/or project will be quoted upon request. (Storage format may vary) $0.00 B. HARD COPY MAP - from selected, pre-existing GIS Projects 1st Sheet = $15 Additional Pages = $5 each Glossy Paper= $12 /sheet 1. Farmland Preservation Program Status Map 2. Land Preservation: Proposed & Preserved 3. Other: (please identify)_______________________________ 4. Total $ C. CUSTOM ORDER MAPS 1. Description of area by block & lot, coordinate or other identifying factor DATA LAYERS, SPECIFY ANY LABELING, DRAW ORDER 2. Total number of layers listed above _________ X $14.50 $ 3. Number of digital orthophotographs required _________ X $17.00 4. Number additional copies of requested map __________ X $5.00 $ 5. Total (C.2. + C.3 + C.4.) D. Media Charge - CD's only $2.50 each except for 1., 2., & 3.b. above) E. Special Services Fee (if applicable) $0.00 F. On-site, on-screen review of digital layers $no charge TOTAL COST: Add A.1. + A.2. + A.3.b. + A.4.c. + A.5. + B.4. + C.5. + D. + E. = $0.00 Requestor's Signature and License Agreement The County of Burlington Department of Information Technology distributes digital and hardcopy cartographic data under the terms and conditions as outlined in the Burlington County GIS Data Distribution Policy. I acknowledge that I have received, read and understand this policy and agree to abide by the terms and conditions of the Policy concerning use and distribution of this data. Metadata for all layers of information was made available and reviewed to ensure the proper use of the information. Applicant's Signature_____________________________________ Date______________________ NOTE: By signing this form the requestor acknowledges that all symbology used and labeling of features is in accordance with standards established by the Department of Information Technology, County of Burlington. Every effort is made to accomodate the format requested, however, the Department of Information Technology reserves the right to modify the request to conform to appropriate standards. Any misuse of the data or product provided is the responsibility of the requestor. See 'Access Constraints' for GIS Distribution Policy. Fire Hydrants Burlington County, NJ, USA County of Burlington, Department of Information and Technology, Geographic Information Systems Section withheld County of Burlington, Department of Information and Technology, Geographic Information Systems Section FireHydrants vector digital data ISO 19115 Topic Category fire hydrant public safety draft point suction point These are all fire hydrant and draft point locations in the 40 municipalities that make up the geographic area of Burlington County. The purpose of this feature class is to create, maintain, and update an active inventory of all of the hydrants and draft points in Burlington County. This is an inventory that will be used by fire, EMS, and 911 dispatchers. English In work Continually ESRI ArcCatalog 9.3.1.1850 Feature Class 329368.413789 518323.098046 270897.769138 491059.462976 -75.082525 -74.406232 40.181588 39.575715 Merrilee Torres County of Burlington, NJ GIS Specialist 1 609-702-7067 609-265-3721 merricknj3@aol.com 20080527 20130409 ground condition Contact the Distributor if you have any questions or concerns regarding the distribution and/or download of this data. If you have questions or concerns regarding the data itself, please contact the Metadata Contact person listed in the Metadata Reference Section. Merrilee Torres County of Burlington, Department of Information and Technology, Geographic Information Systems Section GIS Specialist 1 physical address

49 Rancocas Road, Room 111

Mount Holly NJ 08060 USA (609) 702-7067 (609) 265-5022 mtorres@co.burlington.nj.us see "Access Constraints" Data can be provided in Esri shapefile or geodatabase see "Access Constraints" Dan Constanza County of Burlington, Department of Information and Technology, Geographic Information Systems Section GIS Specialist 3 physical address

49 Rancocas Road, Rm 111

Mount Holly NJ 08060 USA 609-265-5431 609-265-3721 dconstanza@co.burlington.nj.us 06/29/2011 en FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998 local time 20180411 14321600 20141218 11462400 FALSE FireHydrants 002 -17954599.999964 516492.631983 -46918099.999935 491059.462976 1 Projected GCS_North_American_1983 NAD_1983_StatePlane_New_Jersey_FIPS_2900_Feet <ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.5'><WKT>PROJCS["NAD_1983_StatePlane_New_Jersey_FIPS_2900_Feet",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137.0,298.257222101]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",492125.0],PARAMETER["False_Northing",0.0],PARAMETER["Central_Meridian",-74.5],PARAMETER["Scale_Factor",0.9999],PARAMETER["Latitude_Of_Origin",38.83333333333334],UNIT["Foot_US",0.3048006096012192],AUTHORITY["EPSG",3424]]</WKT><XOrigin>-17954599.999964181</XOrigin><YOrigin>-46918099.999935396</YOrigin><XYScale>29765.70015766584</XYScale><ZOrigin>0</ZOrigin><ZScale>1</ZScale><MOrigin>0</MOrigin><MScale>1</MScale><XYTolerance>0.00026876572557086936</XYTolerance><ZTolerance>2</ZTolerance><MTolerance>2</MTolerance><HighPrecision>true</HighPrecision><WKID>102711</WKID><LatestWKID>3424</LatestWKID></ProjectedCoordinateSystem> Linear Unit: Foot_US (0.304801) 20180411 14321600 1.0 Dataset copied. withheld 20090423 13374700 Dataset copied. withheld 07/01/2011 1130 Requests were sent to townships asking for maps or spreadsheets with the locations of all their hydrants/draft points/suction points. As such maps were recieved, Burlington County visited each hydrant/draft point/suction point and collected a GPS feature using a Trimble submeter GPS unit (ProXR, ProXH, GeoXT) by standing next to the feature or with the antenna directly over the hydrant. All GPS data was downloaded, post-process differentially corrected and exported to GIS using GPS Pathfinder Office. Additional attributes were edited as necessary. Data provided by a fire department was incorporated and revisited to fill in missing attributes at which time the positional accuracy was verified. If the provided location seemed significantly off, a new point was mapped with GPS. The Burlington County Department of Information Technology, GIS Section collected the majority of the hydrant/draft point/suction point locations by GPS using Trimble ProXR, ProXH or GeoXT units with post-processed differential corrections to achieve positions that were submeter or better. The GPS positions were collected either directly next the hydrant or with the antenna positioned over the hydrant itself. Those that were mapped by GPS can be distinguished because they contain values in the GPS_BY and COLLECTION_DATE fields. The County's mapping began in 200906 and was considered complete in 2012, however, updates are ongoing. Prior to the start of County mapping in 200906, the townships of Delran, Evesham, Cinnaminson, and Westampton borrowed the County GPS units to map some or all their hydrants or draft points themselves. The resulting data was used wherever possible in this layer but features were site visited in order to collect additional attributes that weren't present in the previous GPS data dictionary. Some townships were able to provide GIS Data - these features do not have a GPS_BY or COLLECTION_DATE value. Whenever possible, Burlington County obtained maps of hydrants and draft/suction points from the relevant fire department(s) before conducting the GPS inventory for that town. If no map could be contained, each street in the town was canvassed and all visible fire hydrants, suction points or draft points were mapped. For towns that had previously mapped their hydrants or provided a GIS file, each feature was visited, location verified, and missing attributes entered. The attributes and values included in this dataset were assembled under the direction of the Evesham Fire Department. Details regarding the attribute values are provided in the Supplemental Document entitled "Collection Procedure of Fire Hydrants.pdf". All field verifiable attributes were entered in the field based on observations. Any additional information provided by the fire department, such as main size, was added in the office. Mapping for all Burlington County townships was considered complete in 2012. A series of maps was created and distributed to the fire departments requesting that they provide the County with any updates or changes. Changes will be incorporated into the master layer within 2 months of being received. The Burlington County Department of Information Technology, GIS Section collected the majority of the hydrant/draft point/suction point locations by GPS using Trimble ProXR, ProXH or GeoXT units with post-processed differential corrections to achieve positions that were submeter or better. The GPS positions were collected either directly next the hydrant or with the antenna positioned over the hydrant itself. withheld 002 Feature Class Feature Class Version 6.2 (Build 9200) ; Esri ArcGIS 10.5.1.7333 FireHydrants 002 -119.499996 -44.501985 40.181588 -89.999991 1 329368.413789 518323.098046 491059.462976 270897.769138 1 -75.082525 -74.406232 40.181588 39.575715 1 dataset EPSG 8.9.3(9.3.0.0) Point Simple FALSE 13059 TRUE FALSE 13059 FireHydrants Feature Class 13059 OBJECTID OBJECTID OID 4 10 0 Internal feature number. ESRI Sequential unique whole numbers that are automatically generated. Easting Easting Double 8 38 8 Easting coordinates in NJ Stateplane Feet calculated by ArcGIS Northing Northing Double 8 38 8 Northing coordinates in NJ Stateplane Feet Calculated by ArcGIS GPS_BY GPS_BY String 20 0 0 This is the data collector's name. Hydrant_num Hydrant_num String 6 0 0 This is a unique indentifier for each hydrant assigned by the municipal fire department or water company if one exists. TOWNSHIP TOWNSHIP String 20 0 0 This is the municipal name of the of the township the hydrant is located in. MUNICIPAL_NUM MUNICIPAL_NUM String 20 0 0 This is the unique identifier number assigned to each municipality when listed in alphabetical order. ST_NAME ST_NAME String 30 0 0 This is the name of the street where the hydrant is located. If on the intersection of 2 streets, it is the street that the steamer (large outlet) faces. ADDRESS_NUM ADDRESS_NUM String 6 0 0 This is address number of the property that the hydrant is in front of/on or near. LOCATION LOCATION String 30 0 0 This is for any miscellaneous location information that would assist in finding/identifying the hydrant. INTERSECTION INTERSECTION String 100 0 0 This is the location of the nearest intersection in relation to the hydrant location. FT_FROM_REDGE FT_FROM_REDGE Double 8 38 8 This the distance in feet that the hydrant is located from the road edge. NUM_OUTLETS NUM_OUTLETS Integer 4 10 0 This is the number of outlets on a particular fire hydrant. size_outlet1 size_outlet1 String 20 0 0 Size of the first outlet in inches size_outlet2 size_outlet2 String 20 0 0 Size of the second outlet (if exists) in inches. size_outlet3 size_outlet3 String 20 0 0 Size of the second outlet (if exists) in inches. SERVICE SERVICE String 20 0 0 This indicates the status of the hydrant AGE AGE Integer 4 10 0 This is the year the hydrant was manufactured or installed. MANUFACTURER MANUFACTURER String 20 0 0 This is the manufacturer of the hydrant. BASE_COLOR BASE_COLOR String 20 0 0 This is the base color of the hydrant. For some the base color may also indicate the NFPA flow color attribute. OBSTRUCTION OBSTRUCTION String 20 0 0 This indicates whether access to the hydrant is obstructed. REMARKS REMARKS String 100 0 0 This is for any miscellaneous remarks about hydrant location, condition, etc. COLLECTION_DATE COLLECTION_DATE Date 8 0 0 This is the date that the GPS point was collected. OWNER OWNER String 20 0 0 This is indicates the type of ownership, namely public or private ownership. CONDITION CONDITION String 30 0 0 This states whether or not the hydrant can be opened. SIZE_MAIN SIZE_MAIN Integer 4 10 0 This is the water main size (in inches). This information is obtained through the town or water company if permitted. NFPA_FLOW_COLOR NFPA_FLOW_COLOR String 20 0 0 This color represents the flow rate of the hydrant. The paint scheme varies between hydrant owners. NFPA_CLASS NFPA_CLASS String 20 0 0 This class represents the flow rate of the hydrant. FLOW_RATE_GPM FLOW_RATE_GPM Double 8 38 8 This is a value for the flow rate of the hydrant (gallons per minute). RESIDUAL_RATE RESIDUAL_RATE Double 8 38 8 FLOW_RATE_DATE FLOW_RATE_DATE Date 8 0 0 This is the date that the flow rate was measured. FLOW_RATE_METHOD FLOW_RATE_METHOD String 30 0 0 This is how the flow rate of the hydrant was tested. STATIC_PSI STATIC_PSI Integer 4 10 0 RESIDUAL_PSI RESIDUAL_PSI Integer 4 10 0 WATER_GRID_NUM WATER_GRID_NUM String 15 0 0 This is the water department grid number in which the hydrant is located. LOCAL_ID LOCAL_ID String 15 0 0 ID used at a local level by MUA or fire department. SIZE_VALVE_OPENING SIZE_VALVE_OPENING Double 8 38 8 This is the size of the valve opening in inches. UPDATE_BY UPDATE_BY String 30 0 0 is the name of the person updating information. UPDATE_TYPE UPDATE_TYPE String 30 0 0 This is the type of updates that were done during attribute editing. UPDATE_DATE UPDATE_DATE Date 8 0 0 This is the date of update in mm/dd/yyyy format. SIZE_OUTLET4 SIZE_OUTLET4 Double 8 38 8 Size of the forth outlet (if exists) in inches. SIZE_OUTLET5 SIZE_OUTLET5 Double 8 38 8 Size of the fifth outlet (if exists) in inches. SIZE_OUTLET6 SIZE_OUTLET6 Double 8 38 8 Size of the sixth outlet (if exists) in inches. SIZE_OUTLET7 SIZE_OUTLET7 Double 8 38 8 Size of the seventh outlet (if exists) in inches. SIZE_OUTLET8 SIZE_OUTLET8 Double 8 38 8 : Size of the eighth outlet (if exists) in inches. SIZE_OUTLET9 SIZE_OUTLET9 Double 8 38 8 Size of the ninth outlet (if exists) in inches. SIZE_OUTLET10 SIZE_OUTLET10 Double 8 38 8 Size of the tenth outlet (if exists) in inches. Max_PDOP Max_PDOP Double 8 38 8 This is the Max PDOP value achieved during GPS collection. Datafile Datafile String 20 0 0 This is the name of the GPS datafile. Std_Dev Std_Dev Double 8 38 8 This is the standard deviation of the collected points for the hydrant. Point_ID Point_ID Integer 4 10 0 ID automatically generated by GPS software export. Not maintained in GIS. GPS_Date GPS_Date Date 8 0 0 This is the date the file was collected. GPS_Time GPS_Time String 10 0 0 This is the time the file was collected. Type Type String 10 0 0 This is the type of water source (hydrant, draft pipe, water draft). Water_Serv Water_Serv String 50 0 0 This is the organization responsible for the hydrant infrastructure and maintenance. FLOW_GPM FLOW_GPM Double 8 38 8 This is the water flow of the hydrant (in gallons per minute). FLOW_AVAIL FLOW_AVAIL Double 8 38 8 This is the amount of water flow available with the hydrant (in gallons per minute). ATWM ATWM String 25 0 0 This is the method in which the file was created. VEN_NUM VEN_NUM String 3 0 0 This is the Burlington County venue code value for the municipality. HYDRANT_VEN HYDRANT_VEN String 12 0 0 This is the Burlington County venue code value for the municipality, along with the unique hydrant number. Shape Shape Geometry 4 0 0 Feature geometry. ESRI Coordinates defining the features. GIS_ID GIS_ID String 7 0 0 This is a unique value for each feature that is a combination of the municipal number and and numeric value. Source Source String 100 0 0 Latitude Latitude Double 8 38 8 Longitude Longitude Double 8 38 8 Photo Photo String 250 0 0 Bonnet_Cap_Color Bonnet_Cap_Color String 25 0 0 Center_Cap_Color Center_Cap_Color String 25 0 0 Side_Cap_Color Side_Cap_Color String 25 0 0 Section Section String 50 0 0 created_user created_user String 255 0 0 created_date created_date Date 8 0 0 last_edited_user last_edited_user String 255 0 0 last_edited_date last_edited_date Date 8 0 0 GlobalID GlobalID GlobalID 38 0 0 20180411 North American Datum of 1983 Geodetic Reference System 80 6378137.000000 298.257222 GCS_North_American_1983 NAD_1983_StatePlane_New_Jersey_FIPS_2900_Feet coordinate pair survey feet 0.000034 0.000034 Explicit elevation coordinate included with horizontal coordinates 1.000000 ISO 19115 Geographic Information - Metadata DIS_ESRI1.0